logo

Are you over 18 years of age?

FREE UK delivery

over £20 + Same day dispatch

EARN EVO COINS

WITH EVERY PURCHASE

Our customers say

ohms law

Understanding Ohm's Law in Vaping: Ensuring Safe Battery use

Written by: Evolution Vaping

|

|

Time to read 5 min

Ohm's Law is a fundamental principle in vaping that helps vapers understand the relationship between resistance, voltage, and current. In this blog post, we will explain Ohm's Law and provide guidance on how to check if your batteries are appropriate for your vape kit, ensuring a safe vaping experience.

You can also use our simple ohm's law calculator on our vaping calculator page. Just input your wattage and resistance to get an accurate result and check it against your chosen batteries.

What is Ohm's Law

Ohm’s Law is a fundamental principle in the world of electronics, and understanding it can be crucial for vaping safely. In layman’s terms, Ohm’s Law is all about the relationship between voltage, current, and resistance in an electrical circuit.


Here’s a simple way to think about it:


  • Voltage is like the pressure from a water pump that pushes water through a hose; it’s the “push” that makes electric charges move.
  • Current is like the flow rate of the water running through the hose; it’s the amount of electricity that flows.
  • Resistance is like the width of the hose; a narrower hose reduces the flow of water, just as a higher resistance reduces the flow of electricity.

A hand made vape coil and coil tools
Handmade Coils by scott collection

Ohm’s Law states that the current (I) flowing through a wire is directly proportional to the voltage (V) across it, divided by the resistance (R) of the wire.


For vaping, this means that if you increase the voltage, you’ll get more current, as long as the resistance stays the same. But if you increase the resistance, you’ll get less current for the same voltage. Understanding this balance can help you vape safely, ensuring you don’t overheat the coil or draw too much current from the battery.

Remember, always use vaping equipment within the recommended specifications and never exceed the limits of your device’s battery.

Battery safety and using ohm's law

Below we have outlined some basic steps you can take to ensure you are using the correct battery for your vape kit. Whether it is a mechanical mod with no safety features or a regulated mod with a lower ohms build limit.


These basic steps will have you well on your way to a safe vaping experience remember to always seek advice from experts if you are unsure. If in doubt don't take the risk.

Identify required battery type

Determine the type of battery used in your vape kit, such as 18650,21700, and any other specific battery model. This can be found in the user manual or sometimes printed inside the bay of the mod. It's always best to purchase batteries for vaping from a trusted vape shop, we stock brands that cater to vaping and that have been tested in vape kits to check their battery ratings accuracy.

Check your battery specification

  • Examine the battery's specifications, including its amp rating (continuous discharge rating) and capacity (mAh).
  • The amp rating indicates the maximum safe discharge current for the battery.
  • Ensure that the battery's amp rating is sufficient to handle the power demands of your vape kit. This can be done with our calculator on our vape calculator page!

Calculate the maximum safe current

  • Use Ohm's Law to calculate the maximum safe current (in amps) your battery can handle.
  • Divide the battery's voltage (usually 4.2V for a fully charged battery) by the resistance of your atomizer coil (in ohms).
  • The result is the maximum current that should not exceed the battery's amp rating. The Amp rating will be printed on the battery wrap.

Consider some safety margins

  • It is recommended to have a safety margin by not pushing the battery to its limit. Build a couple of points of an ohm higher than the lowest safe margin.
  • Leave some headroom between the battery's amp rating and the maximum current drawn by your atomizer coil. Building slightly higher and using slightly less power may save you in the long run!

Seek expert advice

  • If you are unsure about performing the calculations or understanding the battery specifications, consult an experienced vaper or contact the manufacturer for guidance.
  • Most vape shops will be able to go through your battery specs and suggest either a recommended lowest safe ohms.
  • Failing that if your battery is not suitable they will help you with some trusted brands of battery suitable for your vape kit.

Tools for checking ohms readings on vape tanks

To check the ohms on a vape tank, you can use various tools depending on your preference and the information you need. Here are common tools for checking ohms in a vape tank:


Ohm Meter:

  • Purpose-built devices designed specifically for measuring the resistance of coils.
  • Simple and convenient to use.
  • Typically compact and portable, making them a handy tool for vapers.

Multimeter:

  • An electronic measurement tool that can measure resistance among other electrical properties.
  • Offers additional functions like voltage and current measurements.
  • Larger and less vape-specific, but useful for those who already have one for other electronic tasks.

Regulated Mods:

  • Many modern regulated vaping devices have built-in ohm readers.
  • Attach your tank to the mod, and it will display the resistance on the screen.
  • Convenient for regular vapers who don't want to carry additional tools.

Online Ohm Calculators:

  • If you know the specifications of your coil, you can use online ohm calculators to estimate the resistance. Much like the one on our vape calculator page.
  • Helpful for planning coil builds or checking compatibility before purchasing new coils.

Coil Packaging:

  • The resistance of pre-built coils is often mentioned on the packaging.
  • Check the specifications provided by the manufacturer for the specific coil you are using.
  • Bear in mind that the ohms reading can fluctuate with use or depending on the device being used to measure the ohms.

When using tools like ohm meters or multimeters, it's important to follow safety guidelines, ensure the device is turned off when attaching or removing the tank, and handle the tools with care. Regularly checking the resistance of your coils is a good practice to maintain a safe vaping experience.

Conclusion

Understanding Ohm's Law and checking battery compatibility is crucial for safe vaping. By ensuring that your batteries can handle the current demands of your vape kit, you minimize the risk of battery failure, overheating, or other safety hazards. Remember to always prioritize safety and consult knowledgeable individuals when in doubt. Happy and safe vaping!

Shop Coil building Supplies

Related Blogs / Guides

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

Menu
Categories